Intel SC450NX Product Guide - Page 100
Connect a signal cable to the drive., The connectors are keyed and can be inserted in only one
View all Intel SC450NX manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 100 highlights
D B A C OM08013 Figure 31. Snap-in Plastic Slide Rails A. Tape drive or other removable media device B. Tab on slide rail C. Screws (4) D. Slide rails (2) 8. Position the drive so the plastic slide rails engage in the bay guide rails. Push the drive into the bay until the slide rails lock in place. 9. Connect a power cable to the drive. The connectors are keyed and can be inserted in only one way. 10. Connect a signal cable to the drive. The connectors are keyed and can be inserted in only one way. • SCSI drive: Attach connectors on the cable to the SCSI device or devices you are installing. • IDE drive: The baseboard has one IDE connector. It can support an IDE signal cable up to 18 inches long. See Figure 29 on page 97 for the cable dimensions. 11. Close the front bezel. 100