Intel SC450NX Product Guide - Page 117
As you do, the cartridge disengages from its, connector on the baseboard.
View all Intel SC450NX manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 117 highlights
7. Disengage the open hinge by moving (not rotating) the entire bracket to the right. Remove the bracket and set it aside. 8. Pull the two tabs attached to the S.E.C. cartridge (visible after you remove the bracket-C in Figure 40) straight away from the baseboard. As you do, the cartridge disengages from its connector on the baseboard. 9. Slide the S.E.C. cartridge straight away from the baseboard, out of the retention module. Put it on a piece of conductive foam and store it in an antistatic package. B C D A B C Figure 40. Removing a Processor A. S.E.C. cartridge B. Retention module guide rails C. Tabs on S.E.C. cartridge D. Processor heat sink OM08039 117
117
7.
Disengage the open hinge by moving (not rotating) the entire bracket to the right.
Remove the
bracket and set it aside.
8.
Pull the two tabs attached to the S.E.C. cartridge (visible after you remove the bracket—C in
Figure 40) straight away from the baseboard.
As you do, the cartridge disengages from its
connector on the baseboard.
9.
Slide the S.E.C. cartridge straight away from the baseboard, out of the retention module.
Put it
on a piece of conductive foam and store it in an antistatic package.
OM08039
B
B
C
D
C
A
Figure 40.
Removing a Processor
A.
S.E.C. cartridge
B.
Retention module guide rails
C.
Tabs on S.E.C. cartridge
D.
Processor heat sink