Intel SC450NX Product Guide - Page 99
Record the drive model and serial numbers in your equipment log
View all Intel SC450NX manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 99 highlights
1. Observe the safety and ESD precautions at the beginning of this chapter. Also see the cabling considerations on page 97. 2. Open the front bezel by rotating its right side out and to the left. 3. Push the tab (A in Figure 30) on the left side of the EMI metal shield to the right to disengage it from the chassis. Save the shield. A OM08016 Figure 30. Removing EMI Shields 4. Remove the drive from its protective wrapper, and place it on an antistatic surface. 5. Record the drive model and serial numbers in your equipment log (page 163). 6. Set any jumpers or switches on the drive according to the drive manufacturer's instructions. 7. Using two screws of the appropriate size and length (not supplied), attach each plastic slide rail with its metal grounding plate to the drive. 99