Intermec CS40 CS40 Mobile Computer User's Manual - Page 115
Clean Booting the Computer, Start > Programs > Shut Down
View all Intermec CS40 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 115 highlights
Chapter 9 - Troubleshooting and Maintaining the Computer To cold boot your computer: 1 If possible, tap Start > Programs > Shut Down. 2 Remove the battery pack from the computer and wait at least 30 seconds. 3 Install the battery pack and press the Power button. Clean Booting the Computer A clean boot erases the memory in the mobile computer, including all applications and data files found in the ObjectStore, and loads only the default files and programs required by the computer operating system. During a clean boot, the computer first looks for the SSPB files on an installed microSD card. If no card is found, the computer loads the SSPB files in the Flash File Store. Files found on a microSD card during a clean boot are copied into the Flash File Store and overwrite the existing SSPB files. If the computer seems to be locked up, try warm booting and then cold booting the computer. If neither method works, use a clean boot to get the computer up and running for further troubleshooting. To clean boot the computer: 1 Remove the battery pack from the computer and wait at least 30 seconds. 2 Install the battery pack and press the Power button. 3 When the computer starts the boot process, simultaneously press and hold < and > until the IPL Boot Configuration Menu appears. CS40 Mobile Computer User's Manual 103