Intermec CS40 CS40 Mobile Computer User's Manual - Page 22
About Battery Life and Conservation, Battery Conservation Tips
View all Intermec CS40 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 22 highlights
Chapter 1 - Using the Computer Battery Status LED LED State Steady green Blinking red Steady red Steady orange Off Description The CS40 is connected to a charger and the battery is more than 95% charged. The battery is low. The CS40 goes into Suspend mode. Charge or replace the battery. The CS40 is connected to a charger and the battery is charging. There is a battery error. The battery may be outside the allowable charging temperature or you may need to replace the battery. The CS40 is not on external power and the battery is operating normally. About Battery Life and Conservation Batteries that are stored outside the CS40 for long periods of time slowly discharge. Intermec recommends storing the battery in a charger to maintain battery performance. Battery Conservation Tips When You Want To: Do This to Save Battery Power: Stop using the CS40 for 5 minutes or longer. Store the CS40 for a few days. Store the CS40 for several weeks or months. Make sure that the low battery icon is not on the screen and the Battery LED is not on. Press and hold the Power button for about 4 seconds to suspend the CS40. Charge the battery or connect the CS40 to a power source. Charge the battery, and then store the CS40 in a cool location. If you store the CS40 for several months, regularly recharge the battery to keep it at peak performance. 10 CS40 Mobile Computer User's Manual