JVC EX A10 Instructions - Page 12

Connections Standard setup Preparation Do not turn on the power until you complete the connection. DVD player Speaker Receiver Speaker Connecting the antennas Connecting the AM loop antenna (supplied) 1 Set up the AM loop antenna. 2 Connect the antenna cord. Receiver (rear panel) White Black 3 Turn the AM loop antenna to find the best position for radio reception. Place the AM loop antenna as far from the receiver as possible. • Do not place the AM loop antenna on a metallic table or close to a TV, computer, or other electric appliances. Doing so may affect radio reception. 7 When radio reception with the supplied AM loop antenna is poor Electric wire: 3 - 5 m (9′ 10″ - 16′ 5″) (not supplied) Twist together electric wire and the AM loop antenna cord. Electric wire AM loop antenna cord Stretch out the electric wire horizontally, preferably in a high place such as above a window or outdoors. Connect the AM loop antenna cord to the receiver together with the electric wire. Connect the ends of the antenna cord as shown above. If insulation covers the tips of the antenna cord, twist and pull off the insulation. Receiver (rear panel) When positioning the antennas, find the best position for reception while listening to an actual radio program (refer to "Listening to radio broadcasts" (A page 18)). 7