JVC EX A10 Instructions - Page 44

Changing the initial settings with the preference screen (continued) PICTURE AUDIO PICTURE Items MONITOR TYPE Contents ( : initial setting) 16 : 9: For an ordinary wide TV. 4 : 3 LB (Letterbox) : For a TV with conventional 4:3 aspect ratio. When a wide screen picture is input, the black bars appear on the top and bottom of the screen. 4 : 3 PS (Pan Scan): For a TV with conventional 4:3 aspect ratio. When a wide screen picture is input, the left and right edges of the picture will not be shown on the screen. (If the disc is not compatible with Pan Scan, the picture will be displayed at the Letterbox ratio.) PICTURE SOURCE SCREEN SAVER FILE TYPE Select an item suitable to the video source. AUTO : The video source type (a video or film) is automatically selected. FILM: To view a film or video recorded with the progressive scan method. VIDEO: To view a normal video. Select the Screen Saver mode between ON / OFF (Screen Saver activates when there is no operation made for about 5 minutes since a still picture was last displayed). Select an item suitable to the file type. AUDIO : For MP3/WMA files. STILL PICTURE: For JPEG files. VIDEO: For ASF/DivX/MPEG1/MPEG2 files. Items DIGITAL AUDIO OUTPUT* Contents ( : initial setting) Select the output signal type suitable to the equipment connected to the DIGITAL OUT terminal (a decoder-built-in amplifier or other digital equipment with an optical input terminal). Refer to "List of relationships of DIGITAL AUDIO OUTPUT preference items and output signal" (A page 40). PCM ONLY : Equipment corresponding only to linear PCM. DOLBY DIGITAL/PCM: Dolby digital decoder or equipment having the same function. DOWN MIX STREAM/PCM: DTS/Dolby digital decoder or equipment having the same function. Select the signal suitable to the equipment connected to the DIGITAL OUT terminal. Set "DOWN MIX" only when "DIGITAL AUDIO OUTPUT" is set to "PCM ONLY". DOLBY SURROUND: Dolby Pro Logic decoder-built-in equipment. STEREO : Ordinary audio equipment. D (Dynamic). To correct the difference between high RANGE volume and low volume when playing back COMPRESSION with low volume (only for a DVD recorded with Dolby digital). AUTO : The D. RANGE COMPRESSION function automatically works. ON: The D. RANGE COMPRESSION function always works. * When using the supplied XV-EXA10, make sure that "DIGITAL AUDIO OUTPUT" is set to "PCM ONLY". OTHERS Items RESUME ON SCREEN GUIDE AV COMPULINK MODE Contents ( : initial setting) Select ON /OFF. (A page 26) Select ON /OFF. (A page 25) When you want to control the supplied DVD player and the connected TV or other equipment at the same time, select a setting according to the type of terminal on the equipment connected to the DVD player. (Refer to "Using the AV COMPU LINK function" (A page 45).) DVD1 : When the video 3 input terminal on the TV or the DVD input terminal is connected. DVD2: When the video 1 input terminal on the TV is connected. DVD3: When the video 2 input terminal on the TV is connected. DivX The DVD player has its own registration REGISTRATION code. You can confirm the registration code, when necessary. Once you have played back a disc in which the registration code is recorded, the registration code of the DVD player is overwritten for copyright protection. 39