JVC EX A10 Instructions - Page 29

Playing back DVDs/CDs Pausing playback 7 When a disc is played back 1 Slide the remote control mode selector to DVD. 2 Press 8. • To return to normal playback, press 3 (play). Advancing the picture frame by frame (only for moving image) 7 When a disc is paused 1 Slide the remote control mode selector to DVD. 2 Press 8 repeatedly. For the locations of the remote control buttons, refer to page 20. Fast reverse/fast forward search 7 When a disc is played back 1 Slide the remote control mode selector to DVD. There are two methods in step 2. 2 Press 1 or ¡. • Each time you press the button, the speed increases. To restore the normal speed, press 3 (play). Hold down PREVIOUS 4 or NEXT¢. • Fast reverse/fast forward search can be used only while the button is pressed. NOTE • For some discs, sound is intermittent or no sound will be produced during fast reverse/fast forward search. • The selectable speeds and displays vary by the disc type. Messages displayed on the TV when the power is turned on The following messages appear depending on the status of the DVD player. NOW READING REGION CODE ERROR! NO DISC OPEN CLOSE CANNOT PLAY THIS DISC Appears when the DVD player is reading the disc information. Wait for a while. Appears when the Region Code of the DVD does not match the code the DVD player supports. (A page 47) Appears when no disc is loaded. Appears when the disc tray is opening. Appears when the disc tray is closing. Appears when an unplayable disc is attempted to be played back. 24