JVC EX A10 Instructions - Page 36

Convenient functions of the DVD player (continued) Playing back a specified part repeatedly (A-B repeat playback) Saving the playback settings for next time (PBC off) You can play back the desired part repeatedly by specifying a start point (A) and an end point (B). 7 When a disc is played back 1 Slide the remote control mode selector to DVD. 2 Press ON SCREEN twice. • The menu bar (A page 36) will be displayed. 3 Press 2/3 (cursor) to select . OFF 4 Press ENTER. 5 Press 5// (cursor) to display . • Other repeat modes can be selected in this step. For other repeat modes, refer to "Playing back a DVD/CD repeatedly (Repeat playback)" (A page 30). 6 Press ENTER at the start point of the part to be repeated (specifying point A). • The icon on the menu bar will be A- . 7 Press ENTER at the end point of the part to be repeated (specifying point B). • The icon on the menu bar will be . A-B will appear in the display window on the DVD player and the part between points A and B will be played back repeatedly. • A-B repeat playback can be cancelled by following the operations below. • Press 7. • Select A-B and press ENTER twice. (Select OFF .) NOTE • You can use A-B repeat playback only within the same title or track. • You cannot use A-B repeat playback during program playback, random playback or repeat playback. • You cannot use the A-B repeat playback function for some DVD VIDEOs. 31 You can save the settings for program playback, random playback or repeat playback so that the settings are activated even after the DVD player is turned off and then on again. Combining this function with the playback timer (A page 43), you can make a variety of playback settings. 1 Slide the remote control mode selector to DVD. 2 Press CLOCK/TIMER. • The current settings for program/random/ repeat playback will be stored. Display on the DVD player NOTE • To cancel the setting save function, press CLOCK/ TIMER again. • Opening the disc tray also cancels the setting save function. • Resume playback does not work when the settings for program/random/repeat playback are saved. For example, if the program playback settings are saved and F DVD is pressed to turn off the DVD player during playback, pressing F DVD to turn on the DVD player again and pressing 3 (play) starts playback of the first programmed track/chapter. Conversely, if the program playback settings are not saved and 3 (play) is pressed after the DVD player is turned on, the resume playback function operates and playback starts from the point where the disc was stopped. • For a JPEG/ASF/DivX/MPEG1/MPEG2 disc, you can use the setting save function for repeat playback only.