JVC EX A10 Instructions - Page 25

Listening to radio/Playing back DVDs/CDs Basic operations of the DVD player Playing back DVDs/CDs 0OPEN/CLOSE DISPLAY DVD FM/AM GROUP/TITLE / PREVIOUS 4 SLOW /1 7 TOP MENU/PG RETURN Remote control mode selector F AUDIO F DVD AUX 3 (play) NEXT ¢ SLOW /¡ 8 MENU/PL 5///2/3 (cursor)/ ENTER ONE TOUCH REPLAY Number buttons SOURCE SELECT Receiver Playing back a DVD/CD 1 Slide the remote control mode selector to DVD. 2 Press 0 OPEN/CLOSE. • The disc tray ejects. 3 Place a disc. Letter-printed surface Disc tray • To listen to an 8 cm (33 16″) disc, place it on the inner hollow of the disc tray. 4 Press 3 (play) or DVD. NOTE • You can also use SOURCE SELECT on the receiver to select a loaded disc as the sound source. • A menu screen may be displayed after starting playback of a DVD. In this case, select a desired item to playback by using the following buttons on the remote control. - Select a desired item using 5///2/3(cursor) and press ENTER. - You can also select a desired item using the number buttons. Refer to "Using the number buttons" (A page 15). • When a DVD AUDIO is played back, signals are converted into analog signals. Beginning playback of a DVD AUDIO displays "DVD-ANALOG" for a short time. When you take the disc out of the disc tray, the display returns to "DVD-DIGITAL" automatically. • When using a DVD player other than the supplied XV-EXA10, select "DVD-DIGITAL" playback or "DVD-ANALOG" playback according to your usage. Each time you hold down DVD, the playback changes among "DVD-DIGITAL", "DVD-ANALOG" and "DVD-AUTO". Return to the initial setting ("DVD-AUTO") when using the XV-EXA10. • Depending on the disc, the actual operation may be different from the description. • When you select a source other than a DVD during playback, the loaded disc stops automatically, and "DVD OFF" is displayed in the display window on the DVD player. 20