JVC EX A10 Instructions - Page 23
Listening to radio broadcasts
UPC - 046838022005
View all JVC EX A10 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 23 highlights
Basic operations/Listening to radio Listening to radio broadcasts Listening to radio FM/AM FM MODE Remote control mode selector TUNING / / PRESET / / ENTER Number buttons MEMORY Selecting a radio station This receiver can receive FM and AM radio broadcasts. 1 Slide the remote control mode selector to RECEIVER. 2 Press FM/AM to select "FM" or "AM". • Pressing FM/AM selects a radio broadcast as the sound source. • You can also use SOURCE SELECT on the receiver to select a radio broadcast as the sound source. • Each time you press FM/AM, the band will toggle between "FM" and "AM". Example: Display on the receiver for U.S.A. or Canada models Setting the AM tuner spacing (only for models sold at post exchanges) Some countries space AM stations 9 kHz apart, and other countries use 10 kHz spacing. If you purchased the system at a post exchange, select either spacing according to the country where you will use the system. This function is not designed for U.S.A. and Canada models. On the receiver ONLY: SEARCH - SEARCH + Receiver 7 When the receiver is turned off To select 10 kHz spacing, while holding down SEARCH + on the receiver, press F on the receiver to turn on the power. "AM 10 kHz STEP" appears in the display window. To select 9 kHz spacing, while holding down SEARCH - on the receiver, press F on the receiver to turn on the power. "AM 9 kHz STEP" appears in the display window. NOTE • If the spacing is switched, the preset radio station memory will be erased. Frequency 3 Press TUNING or TUNING repeatedly to select a radio station (frequency). • When the receiver has received an FM stereo broadcast, "ST" (stereo) indicator lights up. • You can also select a radio station using the automatic tuning. Automatic tuning: Hold down TUNING or TUNING until the frequency starts changing, and then release the button. When the receiver has received a broadcast, the frequency automatically stops changing. To quit the function while searching for a broadcast, press TUNING or TUNING . NOTE • Pressing SEARCH - or SEARCH + on the receiver also enables you to select the radio station. • If an FM stereo broadcast is difficult to hear because of noise, you may be able to hear the broadcast more easily by pressing FM MODE to switch the sound to monaural reception. In this case, "MONO" lights up. To return the sound to stereo reception, press FM MODE again. 18