JVC EX A10 Instructions - Page 39

Adjusting the picture quality (VFP) 7 When a disc is played back or paused 1 Slide the remote control mode selector to DVD. 2 Press VFP. • The current setting will appear on the TV screen. • The "GAMMA" setting adjusts the brightness of neutral tints while maintaining the brightness of dark and bright portions. • The "SHARPNESS" setting adjusts the screen sharpness. 3 Press 2/3 (cursor) to select VFP mode. • Selecting "NORMAL" is suitable for normal usage, and selecting "CINEMA" is suitable for a dark room. When selecting "NORMAL" or "CINEMA", proceed to step 8. • Selecting "USER1" or "USER2" enables you to make detailed adjustment in step 4 and the later steps. 4 Press5// (cursor) to select an item to be adjusted. 5 Press ENTER. Example: TV screen GAMMA 6 Press 5// (cursor) to change the value. 7 Press ENTER. • To adjust other items, go back to step 4. 8 Press VFP. For the locations of the remote control buttons, refer to page 28. NOTE • If no operation is made for several seconds during the procedure, the settings made so far will be automatically stored. • "VFP" stands for "Video Fine Processor". Playing back the bonus group There are some DVD AUDIOs with a special group, called "bonus group", recorded. NOTE • You can use this function when "BONUS" lights up in the display window on the DVD player. 7 When a disc is played back 1 Slide the remote control mode selector to DVD. 2 Press GROUP/TITLE repeatedly to select a bonus group. • "KEY_ _ _ _" appears on the TV screen, and in the display window on the DVD player. 3 Press the number buttons to enter the pin code (4 digits). • The method of obtaining a pin code differs depending on the disc. 4 Press ENTER. • When the correct pin code is entered, "BONUS" disappears and the playback of the bonus group starts. • If an incorrect pin code is entered, try entering the correct pin code again. 34 Playing back DVDs/CDs