JVC VN-C625U Instructions - Page 14
Alarm signal cable, LAN cable, Coaxial cable, Converter Unit, 1 Connecting Cables Continued
UPC - 046838018688
View all JVC VN-C625U manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 14 highlights
Preparation (Step 1 Connection/Installation) 1-1 Connecting Cables (Continued) Cap (Upper) 3. Lead the cable through the cover Make a slit on the (rubber) cap that is attached to the cover, followed by leading the cable through. See diagram on the left on how to make the slit. 4. Connect the cable to this camera Connect cables to the terminal on the ceiling mount. Connection cables include alarm signal cable, LAN cable, coaxial cable and that for the Converter Unit. 1 Alarm signal cable (☞Page 15) Connect this cable to devices with alarm input/output terminals. 1 2 LAN cable (☞Page 16) Connect this cable to a hub or PC. 3 Coaxial cable (☞Page 17) Connect this cable to NTSC monitors. 2 4 Converter Unit (☞Page 18) Connect this to a DC12V power supply. 3 5. Attach the cover 4 Attach the cover to the ceiling mount by following procedure of Step 2 in the reverse order. 1 Attach the cover upon aligning the hole with the safety wire mounting hole on the ceiling mount, followed by turning it in the clockwise direction. 2 Fasten the cover fastening screw. E-14