KitchenAid KSM1FPA Instruction Manual - Page 22

TROUBLESHOOTING Food Processor attachment doesn't run • Check to see whether the Stand Mixer is plugged into a grounded 3 prong outlet. If it is, check the fuse or circuit breaker on the electrical circuit the Stand Mixer is connected to and make sure the circuit is closed. • Is the fuse in the circuit to the Stand Mixer in working order? If you have a circuit breaker box, be sure the circuit is closed. • Unplug the Stand Mixer, then plug it back into the outlet. • Check to make sure the Food Processor attachment was assembled correctly, and the interlock lid is properly aligned and locked in place. Food Processor attachment not shredding or slicing properly • Make sure the raised-blade side of the disc is positioned face up on the common adapter. • If using the adjustable slicing blade, make sure it is set to the correct thickness. • Make sure ingredients are suitable for slicing or shredding. See "Tips for Great Results" section. Lid won't close when using a disc • Make sure the disc is installed correctly, and is positioned properly on the disc adapter. If the problem is not due to the above item, see the "Warranty and Service" section. Do not return the Food Processor attachment to the retailer. Retailers do not provide service. Clutch engages If the clutch activates, there will be a very loud clicking noise. 1. Check to make sure there are not too many items in the Food Processor attachment. 2. Make sure any hard seeds are removed. Stand Mixer motor slows down This is normal operation and is not damaging to the performance of the attachment. 22