Konica Minolta Kodak Ngenuity 9150 User Guide - Page 18
Getting your documents ready to scan, Carbonless NCR paper
View all Konica Minolta Kodak Ngenuity 9150 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 18 highlights
Getting your documents ready to scan For best scanning results, follow these guidelines: • Standard paper size documents feed easily through the scanner. When organizing your documents for scanning, stack the documents so the lead edges are aligned and centered in the feeder table. This allows the feeder to introduce documents into the scanner one at a time. Maximum thickness: Rotary: .0015 - .035 in. (.038 mm - 0.89 mm) Straight Pass-Through Door: .0015 - .070 in. (.038 mm - 1.78 mm) Maximum weight: 7 to 320 lbs. (30 to 1,200 g/m2) bond • Remove all staples and paper clips before scanning. Staples and paper clips on documents may damage the scanner and documents. • Glued or curled documents may cause a paper jam or damage in the feeder. • All inks and correction fluids on the paper must be dry before scanning is started. • Sheets that are exceptionally thick or thin should be placed in the feeder table manually, one sheet at a time, or you can use the optional straight pass-through adapter. The following types of documents may cause jams or may cause the scanner to feed more than one sheet at a time. - Overhead projector sheets, plastic films, cloth or metallic sheets - Paper with irregularities such as tabs, staples, paste and similar items - Thick or irregular documents such as envelopes or documents that are glued together - Thermal or heat sensitive paper - Tracing paper - Damaged or wrinkled documents - Photographs - Coated paper - Thick plastic cards such as credit cards or identification cards - Torn sheets and documents with notches, holes, punched or perforated sheets - Extremely smooth or shiny paper - Paper that is highly textured - Paper with carbon sheets - Carbonless (NCR) paper 3-2 A-61662 October 2011