Konica Minolta Kodak Ngenuity 9150 User Guide - Page 57
Cleaning the separation roller, The separation roller cover is spring-loaded. Hold
View all Konica Minolta Kodak Ngenuity 9150 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 57 highlights
5. Re-install the pick roller. 6. Remove the drive roller by pushing the roller to the right. Hold the drive roller shaft in place and slide it off the shaft. Gently release the drive roller shaft back into position. 7. Using a roller cleaning pad, scrub the roller tires using a side-to-side motion. Rotate the roller to clean the entire surface. 8. Re-install the drive roller. Cleaning the separation roller 9. Pull the separation roller door forward and remove the separation roller. NOTE: The separation roller cover is spring-loaded. Hold the separation roller cover back until you remove the separation roller, then gently lower the roller cover back in place. 10. Using a roller cleaning pad, scrub the roller tires using a side-to-side motion. Rotate the roller to clean the entire surface. 11. Re-install the separation roller by aligning the slots on the separation roller with the holders. A-61662 October 2011 6-5