Konica Minolta Kodak Ngenuity 9150 User Guide - Page 19
Manually feeding documents, Source>Scanner, Source>Properties, Manual
View all Konica Minolta Kodak Ngenuity 9150 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 19 highlights
Manually feeding documents For demonstration purposes, VRS Test Application is used in the following procedure. 1. Turn on the scanner and wait until the scanner is ready. 2. Turn on the host PC. 3. Launch the scanning application (in this example, VRS Test Application) and from the Menu bar, select Source>Scanner (Source = 9000 with VRS with AIPE). 4. When the scanner is connected, select Source>Properties to open the scanning application's Scanner Properties window. 5. Select Manual from the Source drop-down box. 6. Lift the skimmer to the up position. 7. Remove any paper from the feeder. 8. Start a scan, either single or batch. The feeder table will move up, and the Manual Feed LED will light. The scanner motor will start and beep indicating it is ready for scanning. 9. Carefully insert the page, keeping your hands and fingers away from the rotating tires on the feed rollers. The scanner will feed the page, run it through the scanner and generate an image. NOTE: If you selected batch scan, you can continue to insert pages, one at a time. 10. When you are finished, press Stop. A-61662 October 2011 3-3