Konica Minolta bizhub 501 bizhub 361/421/501 Box Operations User Manual - Page 131

Communication Settings - E-Mail Settings

Page 131 highlights

Use Document 6 6.5.19 Check Dest. & Send A Fax is sent only after a comparison of the specified Fax number with the Fax number information (CSI) for the recipient's machine indicates a match. This prevents misdirected transmissions since a transmission error occurs if the numbers do not match. ! Detail [Check Dest. & Send] requires that the destination has its fax number registered. Select Line Select "Line 1" or "Line 2" to send a fax if a fax multi line is installed. Specify a line for transmission. When "Unset" is chosen in Select Line, transmit using the line which is then vacant among Line 1 or Line 2. When the Line 1 and the Line 2 are both vacant, priority is given to the Line 1. ! Detail You cannot specify a line when "Line 2 Setting" of "Multi Line Setting" is set to "RX Only". When two lines are used separately as an outside line and an extension, be sure to specify a line to be used. Selecting [Unset] may result in an incorrect transmission. Communication Settings - E-Mail Settings About E-Mail Settings Specifies the document name, subject, From address and message body for sending E-Mails. Document Name Displays the name of the file to be saved. The document name specified later appears as the document name, even if the document name was specified in the File Document screen. You can enter up to 30 characters. Subject The text specified in Utility mode is automatically displayed. Press [Direct Input] to change the text. You can enter up to 64 characters. 501/421/361 6-41

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
  • 85
  • 86
  • 87
  • 88
  • 89
  • 90
  • 91
  • 92
  • 93
  • 94
  • 95
  • 96
  • 97
  • 98
  • 99
  • 100
  • 101
  • 102
  • 103
  • 104
  • 105
  • 106
  • 107
  • 108
  • 109
  • 110
  • 111
  • 112
  • 113
  • 114
  • 115
  • 116
  • 117
  • 118
  • 119
  • 120
  • 121
  • 122
  • 123
  • 124
  • 125
  • 126
  • 127
  • 128
  • 129
  • 130
  • 131
  • 132
  • 133
  • 134
  • 135
  • 136
  • 137
  • 138
  • 139
  • 140
  • 141
  • 142
  • 143
  • 144
  • 145
  • 146
  • 147
  • 148
  • 149
  • 150
  • 151
  • 152
  • 153
  • 154
  • 155
  • 156
  • 157
  • 158
  • 159
  • 160
  • 161
  • 162
  • 163
  • 164
  • 165
  • 166
  • 167
  • 168
  • 169
  • 170
  • 171
  • 172
  • 173
  • 174
  • 175
  • 176
  • 177
  • 178
  • 179
  • 180
  • 181
  • 182
  • 183
  • 184
  • 185
  • 186
  • 187
  • 188
  • 189
  • 190
  • 191
  • 192
  • 193
  • 194
  • 195
  • 196
  • 197
  • 198
  • 199
  • 200
  • 201
  • 202
  • 203
  • 204
  • 205
  • 206
  • 207
  • 208
  • 209
  • 210
  • 211
  • 212
  • 213
  • 214
  • 215
  • 216
  • 217
  • 218
  • 219
  • 220
  • 221
  • 222
  • 223
  • 224
  • 225
  • 226
  • 227
  • 228
  • 229
  • 230
  • 231
  • 232
  • 233
  • 234
  • 235
  • 236
  • 237

501/421/361
6-41
Use Document
6
Check Dest. & Send
A Fax is sent only after a comparison of the specified Fax number with the Fax number information (CSI) for
the recipient's machine indicates a match. This prevents misdirected transmissions since a transmission
error occurs if the numbers do not match.
!
Detail
[Check Dest. & Send] requires that the destination has its fax number registered.
Select Line
Select "Line 1" or "Line 2" to send a fax if a fax multi line is installed. Specify a line for transmission.
When “Unset” is chosen in Select Line, transmit using the line which is then vacant among Line 1 or Line 2.
When the Line 1 and the Line 2 are both vacant, priority is given to the Line 1.
!
Detail
You cannot specify a line when "Line 2 Setting" of "Multi Line Setting" is set to "RX Only".
When two lines are used separately as an outside line and an extension, be sure to specify a line to be
used. Selecting [Unset] may result in an incorrect transmission.
6.5.19
Communication Settings - E-Mail Settings
About E-Mail Settings
Specifies the document name, subject, From address and message body for sending E-Mails.
Document Name
Displays the name of the file to be saved. The document name specified later appears as the document
name, even if the document name was specified in the File Document screen. You can enter up to 30
characters.
Subject
The text specified in Utility mode is automatically displayed. Press [Direct Input] to change the text. You can
enter up to 64 characters.