Konica Minolta bizhub C280 Service Manual - Page 76
lated and counts one when it reaches to 216.0 mm. For the paper with sub scan size
View all Konica Minolta bizhub C280 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 76 highlights
bizhub C360/C280/C220 Field Service Ver. 1.0 Jul. 2009 3. PERIODICAL MIANTENANCE ITEMS Description Drum unit/ Rotation time of the PC Y,M,C drum and number of prints *4 are counted, and Drum unit/K detected when one of those values reaches to the set life value shown on the right. However, only the PC drum rotation time is available from the life counter. Developing unit/Y,M,C Developing unit/K When the number of printed pages *4 reaches the set life value shown on the right, the end of unit life is detected. Rotation time excess warning threshold value C360/C280: 5,676 M C220:8,489 M C360/C280: 5,676 M C220:8,489 M - - Life threshold value Life stop threshold value C360/C280: 6,244 M C220:9,338 M C360/C280: 6,811 M *3 C220:10,187 M *3 C360/C280: 6,244 M C220:9,338 M C360/C280: 6,811 M *3 C220:10,187 M *3 120,000 counts 123,000 counts *3 600,000 counts 610,000 counts *3 *1: A waste toner full condition is detected with detecting the actual waste toner emissions. *2: Once the toner-full is detected, it has to be replaced with the new waste toner box in order to reset. *3: The initiation of any new print cycle is inhibited when reaching the life stop threshold value. *4: For counting with number of prints, the paper size in the sub scan direction is accumu- lated and counts one when it reaches to 216.0 mm. For the paper with sub scan size of less than 216.0mm, it is accumulated with the size of 216.0 mm. *5: As the transfer roller unit and the ozone filter are included in the transfer belt unit, they are replaced all together. When the transfer belt unit is replaced and New Release is performed, the life counter value is reset. MAINTENANCE 21