Konica Minolta bizhub C280 Service Manual - Page 87
Replacing the transfer belt unit
View all Konica Minolta bizhub C280 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 87 highlights
bizhub C360/C280/C220 4. PERIODICAL MAINTENANCE PROCEDURE Field Service Ver. 1.0 Jul. 2009 4.6.3 Replacing the transfer belt unit A. Periodically replacing parts/cycle • Transfer belt unit : Every 300,000 counts (bizhub C360) Every 260,000 counts (bizhub C280/C220) NOTE • Before replacement operations of the transfer belt unit, make sure to turn OFF the main power switch and the sub power switch. B. Removal procedure 1. Remove the rear right cover. See P.54 [1] 2. Disconnect two connectors [1]. MAINTENANCE A0EDF2C007DA [2] 3. Remove three screws [1], and remove right door hinge cover [2]. [1] A0EDF2C008DA 4. Open the right door and regist unit. [2] 5. Remove two screws [1] and unlock the transfer belt [2]. [1] A0EDF2C009DA 32
4. PERIODICAL MAINTENANCE PROCEDURE
Field Service
V
er. 1.0 Jul. 2009
32
bizhub C360/C280/C220
MAINTENANCE
4.6.3
Replacing the transfer belt unit
A.
Periodically replacing parts/cycle
•
Transfer belt unit
: Every 300,000 counts (bizhub C360)
Every 260,000 counts (bizhub C280/C220)
NOTE
•
Before replacement operations of the transfer belt unit, make sure to turn OFF the
main power switch and the sub power switch.
B.
Removal procedure
1.
Remove the rear right cover.
See P.54
2.
Disconnect two connectors [1].
3.
Remove three screws [1], and
remove right door hinge cover [2].
4.
Open the right door and regist unit.
5.
Remove two screws [1] and unlock
the transfer belt [2].
A0EDF2C007DA
[1]
A0EDF2C008DA
[1]
[2]
A0EDF2C009DA
[1]
[2]