Konica Minolta bizhub C280 Service Manual - Page 89
nd transfer/separation
View all Konica Minolta bizhub C280 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 89 highlights
bizhub C360/C280/C220 MAINTENANCE 4. PERIODICAL MAINTENANCE PROCEDURE Field Service Ver. 1.0 Jul. 2009 2. Install the transfer belt unit with two screws [1]. NOTE • Replace the ozone filter and the transfer roller unit, which are supplied with the transfer belt unit, at the same time. [1] A0EDF2C256DA 3. To reinstall, reverse the order of removal. 4. Turn ON the main power switch. 5. Select [Service Mode] → [Imaging Process Adjustment] → [Gradation Adjust] and carry out gradation adjust. See P.381 4.7 2nd transfer/separation section 4.7.1 Replacing the transfer roller unit A. Periodically replacing parts/cycle • Transfer roller unit: Every 300,000 counts (bizhub C360) Every 260,000 counts (bizhub C280/C220) B. Removal procedure 1. Open the right door and the regist unit. [2] 2. Unlock the lock levers [1] of the transfer roller unit (at two places). 3. Holding onto the lock levers [1] (at two places), remove the transfer roller unit [2]. [1] A0EDF2C013DA 34