Konica Minolta bizhub C280 Service Manual - Page 96
Replacing the tray 2 separation roller assy
View all Konica Minolta bizhub C280 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 96 highlights
bizhub C360/C280/C220 Field Service Ver. 1.0 Jul. 2009 4. PERIODICAL MAINTENANCE PROCEDURE 4.9.3 Replacing the tray 2 feed roller/tray 2 pick-up roller A. Periodically replacing parts/cycle • Tray 2 feed roller: Every 300,000 counts • Tray 2 pick-up roller: Every 300,000 counts B. Procedure 1. Remove the tray 2 paper feed unit. See P.65 2. The remainder of the removal procedure is same as the one for the tray 1 feed roller/ tray 1 pick-up roller. See "Replacing the tray 1 feed roller/tray 1 pick-up roller." See P.37 3. Replace the tray 2 separation roller assy. See P.41 4. Select [Service Mode] → [Counter] → [Life] and clear the count of [2nd.]. See P.443 4.9.4 Replacing the tray 2 separation roller assy A. Periodically replacing parts/cycle • Tray 2 separation roller assy: Every 300,000 counts B. Procedure 1. Remove the tray 2 paper feed unit. See P.65 2. The remainder of the removal procedure is same as the one for the tray 1 separation roller assy. See "Replacing the tray 1 separation roller assy." See P.39 4.9.5 Replacing the manual bypass tray feed roller A. Periodically replacing parts/cycle • Manual bypass tray feed roller: Every 200,000 counts B. Procedure 1. Remove the manual bypass tray separation roller unit. See P.43 2. Remove the screw [1], and remove [1] the connector cover [2]. MAINTENANCE [2] A0EDF2C027DA 41