Konica Minolta bizhub C280 Service Manual - Page 82
Charging
View all Konica Minolta bizhub C280 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 82 highlights
bizhub C360/C280/C220 MAINTENANCE Field Service Ver. 1.0 Jul. 2009 4. PERIODICAL MAINTENANCE PROCEDURE 8. Turn the drum unit lock lever [1] and lock the drum unit. NOTE • If the lock lever is hard to rotate, turn the lever while pushing the drum unit to the rear. [1] A0EDF2C523DA 9. Reinstall the waste toner box. 10. Close the front door. 11. Select [Service Mode] → [Imaging Process Adjustment] → [Gradation Adjust] and carry out gradation adjust. See P.381 4.3 Charging section 4.3.1 Cleaning of the electrostatic charger wire A. Periodically cleaning parts/cycle • Electrostatic charger wire: when toner cartridge/Y,M,C,K is replaced B. Procedure 1. Open the front door. [1] A0EDF2C509DA 2. Slowly pull out the charger-cleaning tool [1] as far as possible. Next, slowly push in the chargercleaning tool as far as possible. Repeat the above operations three times. NOTE • Every time when replacing each color of the toner cartridge, clean the electrostatic charger wire of the corresponding color. • Move the charger-cleaning tool slowly all the way to the end of either way. 27