Home » Konica Minolta Manuals » Printers » Konica Minolta bizhub PRESS C1070/C1070P » Manual Viewer

Konica Minolta bizhub PRESS C1070/C1070P bizhub PRESS C1070/C1070P/C1060/bizhu - Page 19

Power saving function

View all Konica Minolta bizhub PRESS C1070/C1070P manuals

Add to My Manuals
Save this manual to your list of manuals

Page 19 highlights

bizhub PRESS C1070/C1070P/C1060 bizhub PRO C1060L )Power saving function Using the following functions can reduce the power consumption of this machine and provide greater power saving effects. Function Description Power Save func- Auto Low Power tion Turns off the touch panel display to reduce the power consumption of this machine. This machine is placed into the Auto Low Power mode when: • The specified period of time has elapsed with no print jobs exe- cuted in the printable state • Power Save on the control panel has been pressed for a second or more This mode is available when [Auto Low Power] is selected by selecting Utility/Counter - [Administrator Setting] - [System Setting] [Power Save Setting] - [Power Save Function Setting]. There are eight power saving time periods available: 5, 10, 15, 30, 60, 90, 120, and 240 minutes, from which you can select the desired one. Power saving time periods, 90, 120, and 240 minutes, may not be displayed depending on regions. Auto Shut OFF Turns off all LEDs except Power Save and Power LED on the control panel, to reduce the power consumption of this machine. This machine is placed into the Auto Shut OFF mode when: • The specified period of time has elapsed with no print jobs exe- cuted in the printable state • Power Save on the control panel has been pressed for a second or more If the Auto Shut OFF mode is kept for a long time, it may take a while to warm up this machine upon restart. This mode is available when [Auto Shut OFF] is selected by selecting Utility/Counter - [Administrator Setting] - [System Setting] - [Power Save Setting] - [Power Save Function Setting]. There are seven power saving time periods available: 0, 1, 30, 60, 90, 120, and 240 minutes, from which you can select the desired one. ErP Setting Turns the main power off after the Auto Low Power mode, Auto Shut OFF mode, or the sub power switch is kept in the off state for the specified period of time. 1 There are six power saving time periods available: Do Not Switch, 12, 24, 36, 48, 60, and 72 Hours, from which you can select the desired one. If the Weekly Timer is set to [Weekly Timer ON], [ErP Setting] ap- pears dimmed and you cannot configure this setting. Energy-save Mode for Monochrome For monochrome printing, you can carry out it in energy-save mode. Weekly Timer Automatically turns the power of this machine on or off based on the specified time or day of the week. Tips Tips - Utility/Counter - [Administrator Setting] - [System Setting] - [Power Save Setting] - [Power Save Function Setting] is the same as Utility/Counter - [User Setting] - [System Setting] - [Power Save Setting] - [Power Save Function Setting]: use either of the methods to configure a setting. - If Power Save on the control panel is pressed for one second or more, either of Auto Low Power and Auto Shut OFF is enabled. To enable either function, select [Administrator Setting] - [System Setting] - [Power Save Setting] - [Power Save Function Setting]. Reference For details, refer to the HTML User's Guide. 1-8

Section	Page
Configuration and Usage of this Guide	3
HTML User's Guide operating environment	4
Supported Operating Systems/Browsers	4
Display resolution	4
How to display the top page of the HTML User's Guide	4
In a Windows environment	4
In a Macintosh environment	4
Conventions used in this guide	5
Make a Note about This Machine Information	6
Checking the mounted optional devices	6
Checking network information	7
Printing out the Configuration Page Print	7
Contents	8
1 Before Getting Started	12
1.1 Turning the Power ON/OFF	12
Power supply	12
Turning the power on	12
Turning the power off (Image Controller IC-415)	14
Turning off the power (Image Controller IC-308)	17
Power saving function	19
1.2 Available Operations in this Machine	21
Major functions of this machine	21
Print functions	21
Copy functions	21
Scan functions	22
Hold function of print jobs using the HDD	22
Device control function (Web Tools)	22
Application functions	23
Fiery Command WorkStation	23
Printer Delete Utility	24
Fiery Remote Scan	24
Fiery Bridge	24
Fiery Hot Folders	24
2 Let's Make Prints	25
2.1 Printing Flow	25
Step 1: Prepare the printer driver and applications	25
Step 2: Load paper into a tray	25
Step 3: Configure information of the paper loaded into a tray in this machine	26
Step 4: Use the printer driver to print data	26
Step 5: Check the finishing	27
3 Installing Software	28
3.1 Installing the Printer Driver	28
Operating environment	28
In a Windows environment	28
In a Macintosh environment	28
Characteristics of printer driver	28
In a Windows environment	29
Installation	29
Default setting	34
In a Macintosh environment	35
Installation	35
Default setting	38
3.2 Installing Applications	39
Operating environment	39
Fiery utility	39
Fiery Utility setup	39
Function overview	39
In a Windows environment	40
Installation	40
In a Macintosh environment	42
Installation	42
Starting applications	43
Starting Fiery Command WorkStation	43
Starting Fiery Remote Scan	45
Starting Fiery Bridge	46
Starting Fiery Hot Folders	46
4 Basic Operations	47
4.1 Loading Paper	47
Loading paper into the main body tray	47
Loading paper into the Paper Feeder Unit PF-602m	49
Loading Paper in Post Inserter of Folding Unit FD-503	50
4.2 Paper Setting	51
Specifying paper information for a tray	51
4.3 Printer Driver Setting	56
Printer driver functions	56
[Color Mode]: Select an output color	56
[Color Mode]: General	57
[Color Mode]: Expert Setting	58
5 Maintaining the Finishing Quality	59
5.1 Both Sides Adjustment	59
Both Sides Adjustment	59
Adjustment flow	59
Making the Both Sides Adjustment for each tray	60
Chart Adjustment	60
Zoom and Image Shift Adjustment	67
5.2 Image Quality Adjustment	71
Image Quality adjustment	71
Daily image quality management (Calibration)	72
Calibration timing	72
Executing calibration	73
Color Density Control	73
Auto setting of Color Density Control	73
Manual setting of Color Density Manual Control	76
Executing calibration using the image controller	78
Specifying the reference image quality	81
Particular adjustment	82
5.3 Adjusting the Finisher and Saddle Stitcher	83
Opening the screen to be adjusted	83
Adjustable settings	84
6 Troubleshooting	86
6.1 Replenish and Replace Consumables	86
Replacing a toner bottle	86
Replacing a staple cartridge	88
Replacing a waste toner box	90
6.2 Clearing Paper Jams	92
How to view the animation guide	92
[JAM Position] screen	92
Illustration screen for Jam handling	93
6.3 If the Specified Paper is not Found	95
6.4 If an Error has been Displayed during Scanning	97
HDD space insufficiency	97
6.5 Hue Adjustment	99
When calibration is executed for daily management	99
When calibration is not executed	99
6.6 Image Position Adjustment	100
7 Appendix	101
7.1 Good Use of the HTML User's Guide	101
(1) Let's master the search function!	101
(2) Confirm the setting required for the target finishing in an operation example!	101
7.2 Name of each Component	102
External components	102
Internal components	104
Control Panel Layout	106
7.3 Convenient Use of Scan Function (Scan to SMB)	108
Step 1: Prepare the destination computer	108
Step 2: Connect this machine to the network	110
Step 3: Prepare the operating environment for SMB transmission	110
Step 4: Configure settings according to your environment	110
Step 5: Send scan data to a public folder	111
7.4 Major Specifications	112
Machine	112
Feeding-related optional devices	113
Paper Feeder Unit PF-602m	113
Paper Feeder Unit PF-707	114
Large Capacity Unit LU-202	115
Multi Bypass Tray MB-506	116
Post Inserter (Folding Unit FD-503)	117
Post Inserter PI-502	118
Output-related optional devices	119
Relay Unit RU-509	119
Relay Unit RU-510	119
Folding Unit FD-503	120
Large Capacity Stacker LS-505	122
Saddle Stitcher SD-506	123
Perfect Binder PB-503	124
Finisher FS-531	125
Finisher FS-532	127
Finisher FS-612	130
Multi Puncher GP-501	133
Auto Ring Binder GP-502	134
Electronic optional devices	135
Image Controller IC-602	135
Image Controller IC-415	135
Image Controller IC-308	135
Authentication Unit AU-201	135
Original-related optional devices	136
Reverse Automatic Document Feeder DF-626	136
7.5 Weight for each size and copying speed	137
Weight for each size	137
Copying speed	137

Match case Limit results 1 per page

1-8

bizhub PRO C1060L

bizhub PRESS C1070/C1070P/C1060

)

Power saving function

Using the following functions can reduce the power consumption of this machine and provide greater power saving

effects.

Tips

Utility/Counter

- [Administrator Setting] - [System Setting] - [Power Save Setting] - [Power Save Function Set-

ting] is the same as

Utility/Counter

- [User Setting] - [System Setting] - [Power Save Setting] - [Power Save

Function Setting]: use either of the methods to configure a setting.

Power Save

on the

control panel

is pressed for one second or more, either of Auto Low Power and Auto Shut

OFF is enabled. To enable either function, select [Administrator Setting] - [System Setting] - [Power Save Setting]

- [Power Save Function Setting].

Reference

For details, refer to the

HTML User's Guide

Function

Description

Power Save func-

tion

Auto Low Power

Turns off the

touch panel

display to reduce the power consumption

of this machine. This machine is placed into the Auto Low Power

mode when:

•

The specified period of time has elapsed with no print jobs exe-

cuted in the printable state

•

Power Save

on the

control panel

has been pressed for a sec-

ond or more

This mode is available when [Auto Low Power] is selected by select-

ing

Utility/Counter

- [Administrator Setting] - [System Setting] -

[Power Save Setting] - [Power Save Function Setting].

There are eight power saving time periods available: 5, 10, 15, 30,

60, 90, 120, and 240 minutes, from which you can select the desired

one.

Power saving time periods, 90, 120, and 240 minutes, may not be

displayed depending on regions.

Auto Shut OFF

Turns off all LEDs except

Power Save

and

Power LED

on the

con-

trol panel

, to reduce the power consumption of this machine. This

machine is placed into the Auto Shut OFF mode when:

•

The specified period of time has elapsed with no print jobs exe-

cuted in the printable state

•

Power Save

on the

control panel

has been pressed for a sec-

ond or more

If the Auto Shut OFF mode is kept for a long time, it may take a while

to warm up this machine upon restart.

This mode is available when [Auto Shut OFF] is selected by selecting

Utility/Counter

- [Administrator Setting] - [System Setting] - [Power

Save Setting] - [Power Save Function Setting].

There are seven power saving time periods available: 0, 1, 30, 60,

90, 120, and 240 minutes, from which you can select the desired

one.

ErP Setting

Turns the main power off after the Auto Low Power mode, Auto Shut

OFF mode, or the

sub power switch

is kept in the off state for the

specified period of time.

There are six power saving time periods available: Do Not Switch,

12, 24, 36, 48, 60, and 72 Hours, from which you can select the de-

sired one.

If the Weekly Timer is set to [Weekly Timer ON], [ErP Setting] ap-

pears dimmed and you cannot configure this setting.

Energy-save Mode for Monochrome

For monochrome printing, you can carry out it in energy-save mode.

Weekly Timer

Automatically turns the power of this machine on or off based on the

specified time or day of the week.