Konica Minolta bizhub PRESS C1070/C1070P bizhub PRESS C1070/C1070P/C1060/bizhu - Page 81
Specifying the reference image quality
View all Konica Minolta bizhub PRESS C1070/C1070P manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 81 highlights
bizhub PRESS C1070/C1070P/C1060 bizhub PRO C1060L Specifying the reference image quality To stabilize the image quality of this machine, specify the reference values (targets) of the entire printing system in advance. Tips Tips If the image quality has not been appropriately adjusted only through daily calibration, you may improve the situation by carrying out the following tasks. Adjustment order Menu item Description Tips 1 Screen Pattern Specify the screen to be used. Select the required HTML User's screen from [Screen 1], [Screen 2], and [Stochastic]. Guide Select [Administrator Setting] - [System Setting] - [Ex- pert Adjustment] - [Quality Adjustment] - [Custom Screen] to configure the setting. 2 Gamma Automat- Adjusts the curve of the output density against the in- HTML User's ic Adj. put density. Guide This affects the brightness and contrast. On the [MACHINE] screen, select [ADJUSTMENT] - [Execute Adjust Operation] - [Gamma Automatic Adj.] to execute processing. 3 Density Balance Corrects the density balance in the crosswise direc- HTML User's Adjustment tion to output the even density. Guide • On the [MACHINE] screen, select [Adjustment] - [Density Balance Adjustment] - [Density Balance Chart Output] to print out a chart. • On the [MACHINE] screen, select [Adjustment] - [Density Balance Adjustment] - [Density Balance Data Reg/Del] to register the adjusted values. 4-a Color Density Basic Setting Configure a setting so that this p. 5-15 Control (with Re- machine executes calibration lay Unit RU-509 automatically at periodic inter- mounted) vals. Color Density Manual Control Executes calibration at any timing in addition to the periodic adjustment. p. 5-18 Each Paper Type Color Adj. Adjusts the sensor sensitivity to fit the paper. This function is available when using colored paper or enhancing the sensor accuracy. On the [MACHINE] screen, select [ADJUSTMENT] - [Color Density Control] - [Each Paper Type Color Adj.] to adjust the sensitivity. HTML User's Guide 4-b Calibration by im- Executes calibration using Fiery Command Work- p. 5-20 age controller Station. (without Relay Unit RU-509 mounted) 5 Exact Color Executes calibration for color mixture. HTML User's 5 This function can be used to improve the gray bal- Guide ance. 5-23