Konica Minolta bizhub PRESS C1070/C1070P bizhub PRESS C1070/C1070P/C1060/bizhu - Page 68

screen or the, Press [Front] or [Back] to select the print

Get Konica Minolta bizhub PRESS C1070/C1070P PDF manuals and user guides View all Konica Minolta bizhub PRESS C1070/C1070P manuals
Add to My Manuals
Save this manual to your list of manuals

Page 68 highlights

5.1 Both Sides Adjustment % Press [Front] or [Back] to select the print side to be adjusted. & Enter the zoom ratio or the image shift value using the keypad, [,], or [+] on the screen or the Keypad on the control panel. - To specify the zoom ratio, press [Vertical] or [Horizontal], then enter a value. [Vertical] is used to adjust the zoom ratio in the crosswise direction. [Horizontal] is used to adjust the zoom ratio in the paper feed direction. To enlarge the print side, enter the value with a positive mark (+). To reduce it, enter the value with a negative mark (-). The adjustment value changes 0.01% on a 1-step basis. Adjustment Range: [Vertical] -1.00 to +1.00, [Horizontal] -1.00 to +1.00* * [Horizontal] of [Back] must be specified between -0.80 and +0.20. - When not adjusting [Horizontal] of [Back], select [User Setting] - [Common Setting], then set [Back Side Magnification Adj.] to [OFF]. For details, refer to the HTML User's Guide. - To move the print side upward, downward, leftward, or rightward (image shift), press [Up/Down] or [Right/Left], then enter the value. To move the print side upward or rightward, enter the value with a positive mark (+). To move the print side downward or leftward, enter the value with a negative mark (-). The adjustment value changes 0.1 mm on a 1-step basis. Adjustment range: [Up/Down] -10.0 to +10.0, [Right/Left] -3.0 to +3.0 - To switch the positive mark (+) and negative mark (-), press [+/-]. - To reset a value, press [Clear]. - To adjust the zoom ratio and image shift, check the status in the center of a page. 5-10

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
  • 85
  • 86
  • 87
  • 88
  • 89
  • 90
  • 91
  • 92
  • 93
  • 94
  • 95
  • 96
  • 97
  • 98
  • 99
  • 100
  • 101
  • 102
  • 103
  • 104
  • 105
  • 106
  • 107
  • 108
  • 109
  • 110
  • 111
  • 112
  • 113
  • 114
  • 115
  • 116
  • 117
  • 118
  • 119
  • 120
  • 121
  • 122
  • 123
  • 124
  • 125
  • 126
  • 127
  • 128
  • 129
  • 130
  • 131
  • 132
  • 133
  • 134
  • 135
  • 136
  • 137
  • 138
  • 139
  • 140
  • 141
  • 142
  • 143
5-10
5.1
Both Sides Adjustment
D
Press [Front] or [Back] to select the print
side to be adjusted.
E
Enter the zoom ratio or the image shift value using the keypad, [
,
], or [
+
] on the
screen or the
Keypad
on the
control panel
.
-
To specify the zoom ratio, press [Vertical] or [Horizontal], then enter a value.
[Vertical] is used to adjust the zoom ratio in the crosswise direction.
[Horizontal] is used to adjust the zoom ratio in the paper feed direction.
To enlarge the print side, enter the value with a positive mark (+). To reduce it, enter the value with
a negative mark (-).
The adjustment value changes 0.01% on a 1-step basis.
Adjustment Range: [Vertical] -1.00 to +1.00, [Horizontal] -1.00 to +1.00
*
*
[Horizontal] of [Back] must be specified between -0.80 and +0.20.
-
When not adjusting [Horizontal] of [Back], select [User Setting] - [Common Setting], then set [Back
Side Magnification Adj.] to [OFF]. For details, refer to the
HTML User's Guide
.
-
To move the print side upward, downward, leftward, or rightward (image shift), press [Up/Down] or
[Right/Left], then enter the value.
To move the print side upward or rightward, enter the value with a positive mark (+). To move the
print side downward or leftward, enter the value with a negative mark (-).
The adjustment value changes 0.1 mm on a 1-step basis.
Adjustment range: [Up/Down] -10.0 to +10.0, [Right/Left] -3.0 to +3.0
-
To switch the positive mark (+) and negative mark (-), press [+/-].
-
To reset a value, press [Clear].
-
To adjust the zoom ratio and image shift, check the status in the center of a page.