Konica Minolta bizhub PRO 1100 bizhub PRO 1100 Quick Guide - Page 40
Loading paper into the Paper Feeder Unit PF-709, Pull out the tray to load paper into., Open
View all Konica Minolta bizhub PRO 1100 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 40 highlights
4.1 Loading Paper Loading paper into the Paper Feeder Unit PF-709 The following describes how to load paper into an optional Paper Feeder Unit PF-709. The paper loading procedure is the same for Tray 3 to Tray 5. Reference For information about how to load paper into other optional paper feeder unit, refer to the HTML User's Guide. " Pull out the tray to load paper into. NOTICE NOTICE Trays cannot be withdrawn when the machine is powered off. Turn the sub power switch on. In order to prevent the machine from falling down, only one tray can be pulled out at a time. # Open the feed roller. - To load a different size of paper, proceed to step 3. - To load paper that is the same size as the paper already loaded, proceed to step 6. $ Fully open the side guide plates and rear guide plate apart. - Turn the side guide lock knobs (4 locations) of the side guide plates counterclockwise to loosen them. - While pressing the side guide lock release lever of the side guide, fully open the plates apart. - Also, fully open the rear guide plate apart. NOTICE NOTICE When moving the side guide plates, be sure to hold both the side guide lock release lever and the handle on the rear side. If you move only the side guide plate on the front side, it may cause a displacement of the side guide plates. 4-3