Konica Minolta bizhub PRO 1100 bizhub PRO 1100 Quick Guide - Page 75
bizhub PRO 1100, HTML User's Guide, Zoom and Image Shift Adjustment is then
View all Konica Minolta bizhub PRO 1100 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 75 highlights
Zoom ratio adjustment example: The image on the front side is 10 mm in a lengthwise direction while the image on the back side has been lengthened to 10.1 mm. - Press [Vertical] of [Back], then press [1][0][0]. - Then, press [+/-] to change the mark to set the adjustment value to [-1.00]. The image on the back side is reduced by 1%. In this figure, the black mark front side and the blue mark back side. indicates the indicates the Image shift adjustment example: The image on the back side is misaligned 0.5 mm downward and 0.3 mm rightward compared with that on the front side. - Press [Up/Down] of [Back], then press [5] to set the adjustment value to [+0.5 mm]. - Next, press [Right/Left], then press [3] and [+/-] in sequence to set the adjustment value to [-0.3 mm]. The image on the back side shifts 0.5 mm upward and 0.3 mm leftward. ' After the adjustment is completed, press [OK]. bizhub PRO 1100 ( Press [Close] to exit the adjustment. Zoom and Image Shift Adjustment is then completed. - To register adjustment values in a paper profile, press [Register]. - For details about how to register a paper profile, refer to the HTML User's Guide. 5 Tips If printing positions are misaligned between the front and back sides even after the Both Sides Adjustment has been carried out several times, readjust the reference position on the print side. For details about the adjustment procedure, refer to the HTML User's Guide. 5-25