Konica Minolta bizhub PRO 1100 bizhub PRO 1100 Quick Guide - Page 64
Press [Exit Print Mode]., press [Adjustment Start].
View all Konica Minolta bizhub PRO 1100 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 64 highlights
5.1 Both Sides Adjustment * When entry processing is completed, press [Adjustment Start]. The entered adjustment values are applied. + Press Start on the control panel. A test chart is printed out. , Check a gap of the printing position refering the printed out chart. Repeat steps 7 to 10 until all gaps between the front and back sides are cleared. - Press [Exit Print Mode]. 5-14
5-14
5.1
Both Sides Adjustment
I
When entry processing is completed,
press [Adjustment Start].
The entered adjustment values are applied.
J
Press
Start
on the
control panel
.
A test chart is printed out.
K
Check a gap of the printing position refering the printed out chart.
Repeat steps 7 to 10 until all gaps between the front and back sides are cleared.
L
Press [Exit Print Mode].