Kyocera ECOSYS M8130cidn M8124cidn/M8130cidn Operation Guide - Page 207

Operation on the Machine > Place the Originals. When you place envelopes or cardstock on the platen 2 1 1 Put the scanning side facedown. 2 Align it flush against the original size indicator plates with the back left corner as the reference point. NOTE • For the procedure for feeding envelopes or cardstock, refer to the following: When you place envelopes or cardstock on the platen (5-9) CAUTION Do not leave the document processor open as there is a danger of personal injury. IMPORTANT • Do not push the document processor forcefully when you close it. Excessive pressure may crack the platen glass. • When placing books or magazines on the machine, do so with the document processor in the open position. Loading Originals in the Document Processor The document processor automatically scans each sheet of multiple originals. Both sides of two-sided originals are scanned. Originals Supported by the Document Processor Weight 45 to 160 g/m2 (duplex: 50 to 120 g/m2) Sizes No. of sheets Maximum A3/Ledger (297 x 432 mm) (Long-sized 297 x 1,900 mm) to Minimum A5-R/ Statement-R (140 x 182 mm) Plain paper (80 g/m2), Color paper, Recycled paper, High Quality paper: 50 sheets Do not use the document processor for the following types of originals. Otherwise, the originals may be jammed or the document processor may become dirty. • Document Processor Originals Not Supported by the Document Processor Originals bound with clips or staples (Remove the clips or staples and straighten curls, wrinkles or creases before loading. Failure to do so may cause the originals to jam.) • Originals with adhesive tape or glue • Originals with cut-out sections 5-4