Kyocera ECOSYS M8130cidn M8124cidn/M8130cidn Operation Guide - Page 473

Troubleshooting > Adjustment/Maintenance 3 Select [Start]. The pattern is read and adjustment begins. The second pattern is output. 4 Check that the number is printed at the bottom of the pattern and repeat steps 2 to 3 twice to read patterns 2 and 3. 5 Select [OK] in the adjustment end confirmation screen. [Print (1200dpi)] In [Print (1200dpi)], 1 pattern page (No. 1) is printed out. 1 Start Select [Start]. 2 As shown in the illustration, place the printed side down on the platen with the edge with the arrows toward the back and close the original holder. 1 2 3 3 Select [Start]. The pattern is read and adjustment begins. 4 Select [OK] in the adjustment end confirmation screen. Drum Refresh Remove image blur and white dots from the printout. NOTE Drum Refresh cannot be performed while printing. Execute Drum Refresh after the printing is done. 1 Display the screen. [System Menu / Counter] key > [Adjustment/Maintenance] > [Drum Refresh] 2 Adjust as required. Select [Start]. Drum Refresh begins. 11-32