Kyocera ECOSYS M8130cidn M8124cidn/M8130cidn Operation Guide - Page 461
The SD Card is not, damage caused by
View all Kyocera ECOSYS M8130cidn manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 461 highlights
Troubleshooting > Responding to Messages Error Message SSD error. - Checkpoints Staple jam. - System error. - Corrective Actions Reference Page An error has occurred on SSD. Job is canceled. Select [End]. The error cords are as follows. 01: The amount of data that can be saved at once has been exceeded. Turn the power OFF/ON. If the error still occurs, divide the file into smaller files. If the error occurs after the file is divided, the specified file may be damaged. Delete the file. 04: Insufficient space on SSD to complete this operation. Move data or delete unneeded data. NOTE Please be aware that when you carry out initialization of the system, the data saved in SSD will be erased. If a staple jam occurs, the machine will stop and the location of the jam will be indicated on the screen. Leave the machine on and follow the instruction to remove the jammed staple. System error has occurred. Follow the instructions on the screen. T Error Message Checkpoints The cover is open. Is there any cover which is open? Is the top cover of the document processor open? The device cannot be connected because allowed connections would be exceeded. Are three handheld devices connected simultaneously? The manufacturer assumes no responsibility for damage caused by a non-genuine toner. Is the installed toner container our own brand? The phone receiver is off the hook. The SD Card is not formatted. Is the SD Card formatted by this machine? Corrective Actions Close the cover indicated on the screen. Reference Page - Close the document processor - cover. Cancel a connection to a portable device that is not being used, or set the machine's auto disconnect time to break portable device connections. We will not be liable for any damage caused by the use of third party supplies in this machine. If you want to continue, select [Next >]. 10-4 Put down the receiver. - Select [Format] from [Common - Settings], under [System Menu]. 11-20