Kyocera ECOSYS M8130cidn M8124cidn/M8130cidn Operation Guide - Page 488

Appendix > Optional Equipment IMPORTANT If PF-470 or PF-471 is installed, toppling prevention kit must be installed. (1)PF-470 Two additional cassettes identical to the printer's cassette can be installed in the printer. Paper capacity and loading method are the same as the standard cassettes. Loading in the Cassettes 1 (to 3) (3-19) (2)PF-471 Two additional cassettes identical to the printer's cassette can be installed in the printer. Paper capacity and loading method are the same as the standard cassettes. Loading in the Cassettes 1 (to 3) (3-19) (3)DF-470 (ECOSYS M8130cidn) This is a document finisher capable of holding large print runs and of separating and offsetting multiple copies of a printout into individual copies. It can also staple the offset printouts. (4)IB-36 This is a wireless LAN interface card which supports the wireless LAN specifications IEEE802.11n (max. 65 Mbps) and IEEE802.11 g/b. In addition, network printing is possible without using the wireless LAN router because Wi-Fi Direct is supported. This is standard in Inch Model. (5)Card Authentication Kit(B) Option Card Authentication Kit User login administration can be performed using ID cards. To do so, it is necessary to register ID card information on the previously registered local user list. Card Authentication Kit(B) Operation Guide (6)FAX System 13 By installing the FAX kit, fax send/receive is enabled. Also, it is possible to use it as a network fax, by using it with a computer. FAX Operation Guide (7)Expansion Memory Expanding memory enables more complex printing and speeds up print job processing. The optional Expansion Memory provides an additional 2048 MB of memory, allowing expansion up to 3072 MB. 12-3