Kyocera ECOSYS M8130cidn M8124cidn/M8130cidn Operation Guide - Page 216
Interrupt Copy, Canceling Jobs, Press the [Start] key.
View all Kyocera ECOSYS M8130cidn manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 216 highlights
Operation on the Machine > Copying Interrupt Copy This function allows you to pause the current jobs in progress when you need to make copies immediately. When the interruption copy ends, the machine resumes the paused print jobs. NOTE • If the machine is left unused for 60 seconds in interrupt copy mode, interrupt copying is automatically cancelled and printing resumes. You can change the delay until interrupt copying is canceled. Change if needed. Interrupt Clear Timer (8-60) [Priority Override] (6-39) 1 Configure the settings. 1 Select the [Interrupt] key. The current print job is temporarily interrupted. 2 Place the originals onto the machine for interrupt copy, and configure the copy settings. 2 Press the [Start] key. Interrupt copying begins. 3 When interrupt copying ends, select the [Interrupt] key. The machine resumes the paused print jobs. Canceling Jobs 1 Select the [Stop] key with the copy screen displayed. 2 Cancel a job. When there is a job is being scanned The copy job is canceled. When there is a job printing or on standby Canceling job screen appears. The current print job is temporarily interrupted. Select the job you wish to cancel > [Delete] > [Yes] NOTE If "Reserve Next Priority" is set to [Off], the Copying screen appears in the touch panel. In such case, selecting the [Stop] key or [Cancel] will cancel the printing job in progress. Reserve Next Priority (8-23) 5-13