Kyocera KM-5230 Printing System J Instruction Handbook - Page 18
Network settings, line and press the Default key. The printer setting screen will appear.
![]() |
View all Kyocera KM-5230 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 18 highlights
6. Printer Configuration 2 If KPDL (AUTO) is selected at step 1, the Alternate Emulation option will appear. This allows you to select an alternate emulation mode in cases when no print can be made in KPDL mode. After changing the printer setting, press [End] button the recover the printer to online status, then turn OFF/ON the main switch. It is only after turning the main switch OFF/ON, the printer setting will be reflected. (3) Network settings It is possible to set the Internet Protocol (IP) address, Subnet Mask and Gateway address. * These settings should be performed by the network manager or under that per- son's instruction. After changing the printer setting, press [End] button the recover the printer to online status, then turn OFF/ON the main switch. It is only after turning the main switch OFF/ON, the printer setting will be reflected. 1 Make sure that "Off line" is shown in the message display (the printer is currently offline) and press the "Default" key. The printer setting screen will appear. 2 Press the "Network setting" key. The Pin code screen will appear. 18
![](/manual_guide/products/kyocera-km4230-printing-j-instruction-handbook-bb0e27e/18.png)