Kyocera KX5 User Guide - Page 23

Setting an alert for roaming You may use this setting if you want the phone to alert you when you roam outside of your home service area. 1. Select Menu o Settings o Network o Roam/Svc Alert. 2. Select an option and press . - When no svc alerts you with three tones decreasing in pitch when service is lost and three tones increasing in pitch when service is acquired again. - On roam change alerts you with two decreasing tones when roaming service is acquired and three increasing tones when home area service is acquired again. - On any change alerts you with three increasing tones if there is a change in roaming service or three decreasing tones if the phone loses service. Setting the roam ringer You can set a ringer to indicate when an incoming call will be subject to roaming charges. • Select Menu o Settings oSounds o Roam Ringer o Enabled. Setting Call Guard You can set the phone to warn you before you answer or place a call while roaming. • Select Menu o Settings o Convenience o Call Guard o Call prompt. - The phone now emits a distinctive roam ring to indicate when you are roaming during calls. - To accept or place a call while roaming, you must press . Note: Call Prompt is disabled when the phone is in Emergency Mode. Using your phone in an airplane While in an airplane, it is normally required that you turn off your mobile phone because it emits RF signals that interfere with air traffic control. In Airplane mode, however, your phone will not emit RF signals. You cannot make or receive calls, send text messages, or use the Web, but you can play games, use the Scheduler, set the clock, and make emergency calls to designated emergency numbers. Please check with uniformed personnel before operating your phone in Airplane mode. Setting Airplane mode 1. Select Menu o Settings o Convenience o Airplane Mode. 2. Select OK after reading the message. 3. Select Disabled or Enabled. User Guide for the Kyocera Slider Remix KX5 Phone 15