LG HCS5650 Operation Guide - Page 57

Cloning Connections / Teaching Setup

Page 57 highlights

Cloning Connections / Teaching Setup Teaching the Master Setup to Another TV/STB Connections for the LT2002 to Teach another TV/STB the Master Setup 3.5mm Stereo Plug with IR Receiver THE CLONE HAS CONTROL OF THE TV THE CLONE IS VERSION XX THE TV IS VERSION XX THE SW IS REVISION XX CLONE CLOCK= TV CLOCK= XX:XX XX:XX -PRESS ANY KEY TO CONTINUE. -DISCONNECT CLONE WHEN DONE. Ferrite Core DVI (TDK, ZCAT 2035-0930) ¤ QuickSet II Programmer LT2002 PILLOW INT REMOTE IN PILLOW JACK IN AUX (12V DC 40mA) CONTROL AUDIO IN AUDIO OUT 1 2 DIGITAL VIDEO IN DIGITAL VIDEO OUT DIGITAL AUDIO OUT (OPTICAL) Antenna Wall Jack SERVICE DISPLAY CONTROL AC OUT 8A AC IN 120V~ 60Hz RF Coaxial Wire (75ohm) Teach Master TV/STB's Setup to the target TV/STB After learning is complete, remove the M.P.I. cable from the master TV/STB and connect it to the target TV/STB that you want to copy the master TV/STB's setup into. With "THE CLONE HAS CONTROL OF TV" message displayed, press 2 to go to the "TEACH TO TV" option, press ON/OFF, POWER, or ENTER. Select the LT2002 memory that the new setup is in. Press On/Off to transfer the new setup and other information to the new TV/STB. Teaching usually takes 2-3 minutes. After the "TEACHING COMPLETE" message is displayed, press any key to return to the Clone menu, then press ON/OFF, POWER, or ENTER. If finished, detach M.P.I. cable from the target, newly cloned TV/STB. Disconnect TV/STB Power for 15 Seconds Unplug the AC power cord of the newly cloned TV/STB from the power outlet for about 15 seconds to activate the newly-copied setup. AC Power Cord CLONE SELECTION MENU (1) LEARN FROM TV (2) TEACH TO TV (3) SET CLONE CLOCK FROM TV (4) SET TV CLOCK FROM CLONE (5) DISPLAY TV SETUP (6) DISPLAY CLONE SETUP - TO CHANGE MENU ITEMS, PRESS CHANNEL KEYS OR DIGITS. - TO EXECUTE ITEM, PRESS ON/OFF, POWER, OR ENTER This menu should appear after any key is pressed on the Installer remote. TEACHING IN PROGRESS, PLEASE WAIT This display will appear during Teaching function. TEACHING COMPLETE This display will appear after Teaching is complete. PAGE 57

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80

PAGE 57
Cloning Connections / Teaching Setup
Teaching the Master Setup to Another TV/STB
Connections for the LT2002 to Teach another TV/STB the Master Setup
Teach Master TV/STB’s Setup to the target
TV/STB
After learning is complete, remove the M.P.I. cable from the
master TV/STB and connect it to the target TV/STB that you
want to copy the master TV/STB’s setup into. With “THE CLONE
HAS CONTROL OF TV” message displayed, press 2 to go to the
“TEACH TO TV” option, press ON/OFF, POWER, or ENTER.
Select the LT2002 memory that the new setup is in. Press
On/Off to transfer the new setup and other information to the
new TV/STB. Teaching usually takes 2-3 minutes.
After the “TEACHING COMPLETE” message is displayed, press any
key to return to the Clone menu, then press ON/OFF, POWER, or
ENTER. If finished, detach M.P.I. cable from the target, newly
cloned TV/STB.
Disconnect TV/STB Power for 15 Seconds
Unplug the AC power cord of the newly cloned TV/STB from the
power outlet for about 15 seconds to activate the newly-copied
setup.
CLONE SELECTION MENU
(1) LEARN FROM TV
(2) TEACH TO TV
(3) SET CLONE CLOCK FROM TV
(4) SET TV CLOCK FROM CLONE
(5) DISPLAY TV SETUP
(6) DISPLAY CLONE SETUP
-
TO CHANGE MENU ITEMS, PRESS
CHANNEL KEYS OR DIGITS.
-
TO EXECUTE ITEM, PRESS ON/OFF,
POWER, OR ENTER
TEACHING IN PROGRESS,
PLEASE WAIT
TEACHING COMPLETE
This menu should appear after any key is
pressed on the Installer remote.
This display will appear during Teaching
function.
This display will appear after Teaching is
complete.
REMOTE
IN
AUDIO IN
AUDIO OUT
SERVICE
DISPLAY
CONTROL
AUX
CONTROL
DIGITAL
VIDEO OUT
AC IN 120V~ 60Hz
DIGITAL AUDIO
OUT (OPTICAL)
AC OUT 8A
DIGITAL
VIDEO IN
1
2
PILLOW
INT
PILLOW JACK IN
(12V DC
40mA)
QuickSet II Programmer
LT2002
THE CLONE HAS CONTROL OF THE TV
THE CLONE IS VERSION
XX
THE TV IS VERSION
XX
THE SW IS REVISION
XX
CLONE
CLOCK=
XX:XX
TV
CLOCK=
XX:XX
-PRESS ANY KEY TO CONTINUE.
-DISCONNECT CLONE WHEN DONE.
. . . . . . . .
. . . . . . . .
. . . . . . . .
Ferrite Core
(TDK, ZCAT
2035-0930)
3.5mm Stereo Plug
with IR Receiver
DVI
RF Coaxial Wire
(75ohm)
Antenna
Wall Jack
AC Power
Cord