Lenovo ThinkPad 560E TP 560Z User's Guide that was provided with the system in - Page 140
Get IRQ table from Read Mode PCIBIOS 2.1, Get Use table using ACPI BIOS - ibm bios setup
View all Lenovo ThinkPad 560E manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 140 highlights
Title: C79FPMST CreationDate: 06/22/98 12:26:52 Troubleshooting Charts Problem The PC Card installed in a port replicator is not recognized and the PC Card slots are unusable. Action Make sure that: The AC Adapter is connected to the port replicator. The power-on indicator of the port replicator is on. The computer is securely attached to the port replicator. This problem might happen when you reinstall Windows 98, or when you initialize the system with Easy-Setup. Do the following procedure to confirm the settings of Windows 98: 1. Shut down Windows 98 and power off the computer. 2. Connect the AC Adapter to the port replicator and attach the computer to the port replicator. 3. Power on the computer and start Windows 98. 4. Click on Start and move the cursor to Settings and Control Panel. Then click on Control Panel and double-click on System. 5. Click on the Device Manager tab, and double-click on System Device and PCI Bus. 6. Click on the Settings tab, and confirm that Use BIOS is selected. If not, click on USE BIOS. 7. Click on IRQ Steering, and confirm that check marks are added in checkboxes of Get Use table using ACPI BIOS, Get IRQ table using US Specification table, and Get IRQ table from Read Mode PCIBIOS 2.1 call. If not, add check marks in both boxes. 8. Click on OK twice. 9. Follow the instructions on the screen and restart the computer. This problem might also happen when you install a PC Card in a port replicator for the first time. To avoid this problem, do as follows: 1. Click on Start and move the cursor to Settings and Control Panel. 2. Click on Control Panel and double-click on System. 3. Click on the Device Manager tab. 4. Click on Refresh and OK. 126 IBM ThinkPad 560Z User's Reference