Lenovo ThinkPad W701 Hardware Maintenance Manual - Page 111
CPU
View all Lenovo ThinkPad W701 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 111 highlights
Table 36. Installation of the VGA thermal device/fan and thermal putty in ThinkPad W701 and W701ds When installing: • Before you attach the fan assembly to the computer, attach new thermal putty on the video card as shown as a in this figure. a a • Apply thermal grease, at an amount of 0.2 grams, on the part marked b as in the following figure. Either too much or too less application of grease can cause a thermal problem due to imperfect contact with a component. b • Make sure that the fan connector is attached firmly. 1190 CPU For access, remove these FRUs in order: • "1010 Battery pack" on page 68 • "1040 Hard disk drive (HDD) cover, HDD and HDD rubber rails or solid state drive (SSD) and storage converter" on page 70 • "1060 Palm rest or palm rest with fingerprint reader" on page 75 • "1090 Keyboard" on page 80 • "1120 DIMM slot cover and DIMM under keyboard for W701 and W701ds" on page 86 • "1130 Keyboard bezel and speaker assembly" on page 88 • "1170 CPU thermal device/fan" on page 98 Attention: CPU is extremely sensitive. When you service the CPU, avoid any kind of rough handling. Chapter 9. Removing and replacing a FRU 105