Lenovo ThinkPad W701 Hardware Maintenance Manual - Page 55
Error messages, Load Setup Defaults in the BIOS Setup Utility
View all Lenovo ThinkPad W701 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 55 highlights
Table 2. Numeric error codes (continued) Symptom or error 2110 Read error on HDD0 (Main hard disk drive) 2112 Read error on HDD1 (Ultrabay hard disk drive) Error messages Table 3. Error messages Symptom or error Device address conflict. Allocation error for device. Failing bits: nnnn. Invalid system configuration data. I/O device IRQ conflict. Hibernation error. Fan error. Thermal sensing error. Cannot boot from any device. FRU or action, in sequence 1. Reseat the hard disk drive. 2. Main hard disk drive. 3. System board. 1. Reseat the hard disk drive. 2. Ultrabay hard disk drive. 3. System board. FRU or action, in sequence 1. Load Setup Defaults in the BIOS Setup Utility. 2. Backup battery. 3. System board. 1. Load Setup Defaults in the BIOS Setup Utility. 2. Backup battery. 3. System board. 1. DIMM. 2. System board. 1. DIMM. 2. System board. 1. Load Setup Defaults in the BIOS Setup Utility. 2. Backup battery. 3. System board. 1. Restore the system configuration to what it was before the computer entered hibernation mode. 2. If memory size has been changed, re-create the hibernation file. 1. Fan. 2. Thermal grease. 3. System board. System board. Check the status of device which you want to boot from. Device not found. 1. The device you want to boot from. 2. System board. Device Error. 1. The device you want to boot from. 2. System board. No valid operating system. 1. Check that the operating system has no failure and is installed correctly. 2. Reinstall the operation system. Excluded from boot order. • Enter the BIOS Setup Utility and add the device in boot order. Chapter 4. Related service information 49