Lexmark C772N C77x - Setup Guide - Page 16
Scanner option setup, Positioning the scanner
UPC - 734646047227
View all Lexmark C772N manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 16 highlights
4 Scanner option setup This chapter includes information on setting up the MFP (scanner). To assemble this option, you should have the following components: • Printer • 4600 MFP option (scanner) • Printer memory or option cards The setup for this portion of the book covers: 1 Positioning the scanner 2 Installing memory options 3 Installing the printer Positioning the scanner 1 Remove the scanner base from the carton. 2 Place the scanner base on a table, scanner cabinet, or other flat surface. 3 Align the hinges on the scanner top with the slots in the scanner, and then lower the scanner top onto the scanner. For information on removing the scanner top, see "Removing the scanner top" in the User's Guide located on the Software and Documentation CD. 4 Connect the two scanner cables. Note: To prevent errors and scanner malfunction, make sure the scanner cable thumbscrews are tightened securely. 5 Go to Removing the print cartridge packaging on page 16, and follow the printer setup instructions. For information on installing the interface card and memory and firmware cards, go to Installing printer memory or option cards on page 19. Scanner option setup 15