Lexmark C772N C77x - Setup Guide - Page 8

1 Getting started Conventions Note: A note identifies something that could help you. CAUTION: A caution identifies something that could cause you harm. Warning: A warning identifies something that could damage your product hardware or software. Using this book This guide is intended to help you set up your printer and scanner (MFP option). If you do not have an option listed here, you can skip that portion of the guide and continue to the next task. If you need more information to assemble an option or your printer, see the documentation that came with the option or your printer, and then return to this guide and continue setup. Turning off the printer If you are installing a scanner after initial printer setup, turn the printer off, and unplug the power cord from both the wall outlet and the printer or 2000-sheet drawer. If you have any other devices connected to the printer, turn them off as well, and unplug their power cords. Selecting a location for your printer and MFP When selecting a location for your printer and MFP option, you must leave enough room to open the printer trays, covers, doors, and MFP option. It is also important to: • Allow space around the printer for proper ventilation. • Provide a firm, level, and stable surface. • Keep the equipment away from the direct airflow of air conditioners, heaters, or ventilators. • Keep the equipment free of sunlight, humidity extremes, or temperature fluctuations. • Keep the equipment clean, dry, and free of dust. CAUTION: The printer weighs 48-82 kg (105-181 lb). It requires at least three (3) people to lift it safely. Use the printer handholds to lift it, do not lift by the front of the printer, and make sure your fingers are not under the printer when you set it down. Note: Leave the printer and MFP in the box until you are ready to assemble them. Getting started 7