Linksys RTP300 User Guide - Page 105
Response Status Code Handling RTP Parameters RTP Port Max
UPC - 745883565658
View all Linksys RTP300 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 105 highlights
SIP page Voice tab > SIP page > Response Status Code Handling section Field SIT1 RSC SIT2 RSC SIT3 RSC SIT4 RSC Try Backup RSC Retry Reg RSC Description SIP response status code for the appropriate Special Information Tone (SIT). For example, if you set the SIT1 RSC to 404, when the user makes a call and a failure code of 404 is returned, the SIT1 tone is played. Reorder or Busy tone is played by default for all unsuccessful response status code for SIT 1 RSC through SIT 4 RSC. SIP response status code to INVITE on which to play the SIT2 Tone. SIP response status code to INVITE on which to play the SIT3 Tone. SIP response status code to INVITE on which to play the SIT4 Tone. SIP response code that retries a backup server for the current request. Interval to wait before the ATA device retries registration after failing during the last registration. The default is 30. Voice tab > SIP page > RTP Parameters section Field RTP Port Min RTP Port Max RTP Packet Size Max RTP ICMP Err Description Minimum port number for RTP transmission and reception. The RTP Port Min and RTP Port Max parameters should define a range that contains at least 4 even number ports, such as 100 - 106. The default is 16384. Maximum port number for RTP transmission and reception. The default is 16482. Packet size in seconds, which can range from 0.01 to 0.16. Valid values must be a multiple of 0.01 seconds. The default is 0.030. Number of successive ICMP errors allowed when transmitting RTP packets to the peer before the ATA device terminates the call. If value is set to 0, the ATA device ignores the limit on ICMP errors. The default is 0. Linksys ATA Administration Guide 105