Linksys RTP300 User Guide - Page 91
Networking Service Static DHCP Lease Settings
UPC - 745883565658
View all Linksys RTP300 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 91 highlights
LAN Setup page Router tab > LAN Setup page > Networking Service section Networking Service Options are NAT or Bridge. NAT-the unit acts as a router and provides IP addresses to PCs attached to the LAN port. Bridge-The unit acts as a switch, a passthrough, and does not give IP addresses. Router tab > LAN Setup page > LAN Networking Settings section Use these network settings when using NAT. LAN IP Address LAN Subnet Mask Enable DHCP Server DHCP Lease Time DHCP Client Starting IP Address Number of Client IP Addresses IP address of the Linksys ATA device on the LAN side. IP address for subnet mask. Options are Yes or No for the DHCP Server to provide an IP address. Provided by the DHCP Server. IP renewal process begins when the time expires. Initial IP address the DHCP Server provides for PCs attached to the LAN port. Number IP addresses available for the DHCP Server to provide. Router tab > LAN Setup page > Static DHCP Lease Settings section Use these settings when using a static IP address. Enable Host Mac Address Host IP Address Options are Yes or No. Default is No. Match to other device's MAC address. Match to other device's IP address. Linksys ATA Administration Guide 91