Linksys RTP300 User Guide - Page 30

Basic Installation and Configuration, Upgrading the Firmware for the Linksys ATA Device - firmware update

Get Linksys RTP300 - Broadband Router With 2 Phone Ports PDF manuals and user guides
UPC - 745883565658
View all Linksys RTP300 manuals
Add to My Manuals
Save this manual to your list of manuals

Page 30 highlights

Basic Administration and Configuration of Your Linksys ATA Basic Installation and Configuration Basic Installation and Configuration See your particular Linksys ATA device's Quick Installation Guide and User Guide for instructions. If you are configuring the complete Linksys Voice System, also refer to the LVS Installation and Configuration Guide. Upgrading the Firmware for the Linksys ATA Device In this procedure, you install the firmware files that you downloaded previously. 1. Determine the address of the Linksys ATA device: a. Connect an analog telephone to the Phone 1 or Phone 2 port on the ATA device. b. Press **** on the keypad to access the IVR menu. c. Press 110# to determine the Internet (WAN) IP address. 2. Make a note of the IP address that is announced. NOTE: If the administration computer is connected to the Ethernet port of the Linksys ATA device, the default IP address is 192.168.0.1. 3. Use the administration computer to install the latest firmware: a. Extract the Zip file, and then run the executable file to upgrade the firmware. b. When the Firmware Upgrade Warning window appears, click Continue. c. In the next window that appears, enter the IP address of the Linksys ATA device, and then click OK. d. In the Confirm Upgrade window, verify that the correct device information and product number appear. Then click Upgrade. e. A progress message appears while the upgrade is in progress. The success window appears when the upgrade is completed. The device reboots. f. Click OK to close the confirmation message. g. To verify the upgrade, point the web browser to the IP address of the Linksys ATA device. Check the Router > Status page. The Software Version field should show the firmware version that you installed. NOTE: You may need to refresh your browser to display the updated page reflecting the new version number. Linksys ATA Administration Guide 30

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
  • 85
  • 86
  • 87
  • 88
  • 89
  • 90
  • 91
  • 92
  • 93
  • 94
  • 95
  • 96
  • 97
  • 98
  • 99
  • 100
  • 101
  • 102
  • 103
  • 104
  • 105
  • 106
  • 107
  • 108
  • 109
  • 110
  • 111
  • 112
  • 113
  • 114
  • 115
  • 116
  • 117
  • 118
  • 119
  • 120
  • 121
  • 122
  • 123
  • 124
  • 125
  • 126
  • 127
  • 128
  • 129
  • 130
  • 131
  • 132
  • 133
  • 134
  • 135
  • 136
  • 137
  • 138
  • 139
  • 140
  • 141
  • 142
  • 143
  • 144
  • 145
  • 146
  • 147
  • 148
  • 149
  • 150
  • 151
  • 152
  • 153
  • 154
  • 155
  • 156
  • 157
  • 158
  • 159
  • 160
  • 161
  • 162
  • 163
  • 164
  • 165
  • 166
  • 167
  • 168
  • 169
  • 170
  • 171
  • 172
  • 173
  • 174
  • 175
  • 176
  • 177
  • 178
  • 179
  • 180
  • 181
  • 182
  • 183
  • 184
  • 185
  • 186
  • 187
  • 188
  • 189
  • 190
  • 191
  • 192
  • 193
  • 194
  • 195
  • 196
  • 197
  • 198
  • 199
  • 200
  • 201
Linksys ATA Administration Guide
30
Basic Installation and Configuration
Basic Administration and Configuration of Your Linksys ATA
Basic Installation and Configuration
See your particular Linksys ATA device’s Quick Installation Guide and User Guide for
instructions. If you are configuring the complete Linksys Voice System, also refer to the
LVS
Installation and Configuration Guide
.
Upgrading the Firmware for the Linksys ATA Device
In this procedure, you install the firmware files that you downloaded previously.
1.
Determine the address of the Linksys ATA device:
a.
Connect an analog telephone to the Phone 1 or Phone 2 port on the ATA device.
b.
Press
****
on the keypad to access the IVR menu.
c.
Press
110#
to determine the Internet (WAN) IP address.
2.
Make a note of the IP address that is announced.
NOTE:
If the administration computer is connected to the Ethernet port of the Linksys ATA
device, the default IP address is 192.168.0.1.
3.
Use the administration computer to install the latest firmware:
a.
Extract the Zip file, and then run the executable file to upgrade the firmware.
b.
When the
Firmware Upgrade
Warning
window appears, click
Continue
.
c.
In the next window that appears, enter the IP address of the Linksys ATA device, and
then click
OK
.
d.
In the
Confirm Upgrade
window, verify that the correct device information and product
number appear. Then click
Upgrade
.
e.
A progress message appears while the upgrade is in progress. The success window
appears when the upgrade is completed. The device reboots.
f.
Click
OK
to close the confirmation message.
g.
To verify the upgrade, point the web browser to the IP address of the Linksys ATA device.
Check the
Router > Status
page. The
Software Version
field should show the firmware
version that you installed.
NOTE:
You may need to refresh your browser to display the updated page reflecting the
new version number.