Linksys RTP300 User Guide - Page 128
Call Feature Settings Proxy and Registration Use Local Addr
UPC - 745883565658
View all Linksys RTP300 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 128 highlights
Line page Auth INVITE Reply 182 On Call Waiting Use Anonymous with RPID Use Local Addr in FROM When enabled, authorization is required for initial incoming INVITE requests from the SIP proxy. When set to yes, your ATA device replies with a SIP 182 response to the caller if it is already in a call and the phone is off-hook. To use this feature, select yes. Otherwise, keep the default, no. This field is found on the SPA2102 and SPA3102 only. When set to yes, use "anonymous" in the SIP message when remote party ID is requested in the SIP message. This field is found on the SPA2102 only. Default is yes. The IP address of the local address enclosed in the FROM of the SIP message. This field is found on the SPA2102 only. Default is no. Voice tab > Line page > Call Feature Settings section Field Description Blind Attn-Xfer Enable Enables the ATA device to perform an attended transfer operation by ending the current call leg and performing a blind transfer of the other call leg. If this feature is disabled, the ATA device performs an attended transfer operation by referring the other call leg to the current call leg while maintaining both call legs. To use this feature, select yes. Otherwise, select no. MOH Server Conference Bridge URL Conference Bridge Ports The default is no. User ID or URL of the auto-answering streaming audio server. When only a user ID is specified, the current or outbound proxy is contacted. Music-onhold is disabled if the MOH Server is not specified. This feature supports external conference bridging for n-way conference calls (n > 2), instead of mixing audio locally. To use this feature, set this parameter to that of the server's name, for example, [email protected]:12345 or conf (which uses the Proxy value as the domain). This field is found on the SPA2102 and PAP2T only. Select the maximum number of conference call participants. The range is 3 to 10. The default is 3. This field is found on the SPA2102 and PAP2T only. Voice tab > Line page > Proxy and Registration section Field Proxy Outbound Proxy Use Outbound Proxy Description SIP proxy server for all outbound requests. SIP Outbound Proxy Server where all outbound requests are sent as the first hop. Enablse the use of an Outbound Proxy. If set to no, the Outbound Proxy and Use OB Proxy in Dialog parameters are ignored. The default is no. Linksys ATA Administration Guide 128