Linksys RTP300 User Guide - Page 72
Configuring the Streaming Audio Server, Call Forwarding, Call Screening, Call Blocking, DND
UPC - 745883565658
View all Linksys RTP300 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 72 highlights
Configuring Music on Hold Configuring a Streaming Audio Server Use a media signal adapter to connect an Ethernet cable from a media source to the FXS port. The following is a URL for a device that has been tested with Linksys ATA devices: http://www.neogadgets.com/cart/cart.php?target=product&product_id=17&substring =music+coupler After you complete the required configuration, the FXS port is ready to stream audio. The functionality depends on the hook state of the FXS port: • If the FXS port is off hook, an incoming call is answered automatically and audio is streamed to the calling party. NOTE: Each SAS server can maintain up to five simultaneous calls. If the second line on the unit is disabled, then the SAS line can maintain up to 10 simultaneous calls. Further incoming calls receive a busy signal (SIP 486 Response). • If the FXS port is on-hook when the incoming call arrives, a SIP 503 response code is transmitted to indicate "Service Not Available." • If an incoming call is auto-answered, but later the FXS port changes to on-hook, the call is not terminated but continues to stream silence packets to the caller. • The SAS line can be set up to refresh each streaming audio session periodically using a SIP re-INVITE message, which detects if the connection to the caller is down. If the caller does not respond to the refresh message, the SAS line terminates the call so that the streaming resource can be used for other callers. Additional information: • The SAS line does not ring for incoming calls even if the attached equipment is on-hook. • If no calls are in session, battery is removed from tip-and-ring of the FXS port. Some audio source devices have an LED to indicate the battery status. This can be used as a visual indication as to whether audio streaming is in progress. • Call Forwarding, Call Screening, Call Blocking, DND, and Caller-ID Delivery features are not available on an SAS line. Configuring the Streaming Audio Server Use the following procedure to configure an SAS with an external music source. 1. Connect an RJ-11 adapter between the music source (a CD player or iPod, for example) and an FXS port. 2. Start Internet Explorer, connect to the administration web server, and choose Admin access with Advanced settings. Linksys ATA Administration Guide 72