Linksys RTP300 User Guide - Page 142
Line Enable NAT Settings Field, Description, Phone 1+2, NOTIFY, PROXY
UPC - 745883565658
View all Linksys RTP300 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 142 highlights
PSTN Line page (AG310 and SPA3102) Voice tab > PSTN Line page > Line Enable section Field Line Enable PSTN Contact List Description To enable this line for service, select yes. Otherwise, select no. The default is yes. Select the appropriate list: None, Phone 1+2, Phone 1, or Phone 2. The default is Phone1+2. Voice tab > PSTN Line page > NAT Settings section Field NAT Mapping Enable NAT Keep Alive Enable NAT Keep Alive Msg NAT Keep Alive Dest Description To use externally mapped IP addresses and SIP/RTP ports in SIP messages, select yes. Otherwise, select no. The default is no. To send the configured NAT keep alive message periodically, select yes. Otherwise, select no. The default is no. Enter the keep alive message that should be sent periodically to maintain the current NAT mapping. If the value is $NOTIFY, a NOTIFY message is sent. If the value is $REGISTER, a REGISTER message without contact is sent. Escape sequence of %xx is also accepted. For example, %0d%0a is unescaped into \r\n (CRLF). The default is $NOTIFY. Destination that should receive NAT keep alive messages. If the value is $PROXY, the messages are sent to the current or outbound proxy. The default is $PROXY. Voice tab > PSTN Line page > Network Settings section Field SIP ToS/DiffServ Value SIP CoS Value [0-7] RTP ToS/DiffServ Value RTP CoS Value [0-7] Description TOS/DiffServ field value in UDP IP packets carrying a SIP message. The default is 0x68. CoS value for SIP messages. The default is 3. ToS/DiffServ field value in UDP IP packets carrying RTP data. The default is 0xb8. CoS value for RTP data. The default is 6. Linksys ATA Administration Guide 142