Linksys RTP300 User Guide - Page 163
MAC Address: The MAC address in the, Ethernet Port: The port; Ethernet Port
UPC - 745883565658
View all Linksys RTP300 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 163 highlights
UPnP upnp_enable,upnp_config, To allow users to config UPnP: upnp_keep_portmap upnp_enable=1,upnp_config=1 upnp_enable: UPnP status; 1 (enabled) or 0 (disabled) To allow user to config UPnP ,and save upnp_config: Allows configuration of this config even after system reboot: UPnP; 1 (enabled) or 0 (disabled) upnp_enable=1,upnp_config upnp_keep_portmap: Keeps UPnP =1,upnp_keep_portmap=1 configurations after system reboot; 1 To allow user to enable or disable (enabled) or 0 (disabled) Internet access::upnp_enable= NOTE: This paramater applies only if 1,upnp_ internet_dis=1 upnp_config is enabled. To allow user to do any UPnP function: upnp_internet_dis: Prevents Internet upnp_enable=1,upnp_config access; 1 (Internet access is disabled) =1,upnp_keep_portmap=1,upnp_ or 0 (Internet access is allowed) internet_dis=1 QoS Category Priority category_ To configure a rule for an application: Rule number,name, priority,port_range category_num: QoS Category number; = 1,name= ap1, priority=3,port_range= 111;222; 0;333;444;1 1 (application), 2 (online game), 3 To configure a rule for an online game: (MAC address), 4 (Ethernet port) Format 1 (default game): category_ number=2, the selected category name,priority Application: The name of the Example: application category_num Online Games: The name of the game = 2, name=Age of Empires,priority=2 MAC Address: The MAC address in the format xx:xx:xx:xx:xx:xx Format 2 (with port range): category_ number=2, name,priority,port_range category_num=2, name= priority: Priority; 0 (Low), 1 (Normal), 2 game1,priority=1, port_range= 555; (Medium), 3 (High) 666;1 port_range: The port range; To configure a rule for a MAC Address: start;end;protocol category_num start : The first port number in the =3,name=mac1,priority=1,mac= 00:02: range 03:04:05:06 end: The final port number in the range To configure a rule for an Ethernet port: category_num protocol : 0 (Both, 1 (TCP, 2 (UDP = 4,name= Ethernet Port 1,priority=0 To delete all rules: Linksys ATA Administration Guide 163