Linksys RTP300 User Guide - Page 90

LAN Setup page Router tab > WAN Setup page > Remote Management section Enable WAN Web Server WAN Web Server Port Allows or prevents access to the administration web server from a computer that is not directly connected to the ATA device. Options are Yes or No. The default value is Yes. The port that is used for WAN access to the ATA device. The default value is 80. Router tab > WAN Setup page > QOS Settings section Use Quality of Service (QoS) to assign different priority levels to different types of data transmissions. QOS Policy QOS QDisc Maximum Uplink Speed Enable when you want to use QoS. Options are: Always On or On when Phone is Use (default). Allow QoS Queuing. Options are None or TBF (token bucket filter). Information can be found at about TBF at: http://lartc.org/howto/ lartc.qdisc.classless.html The maximum bandwidth for LAN to WAN throughput. The default is 128 kbps. Router tab > WAN Setup page > VLAN Settings section Enable VLAN VLAN ID Allows (yes) or prevents (no) VLAN access. NOTE: Choose yes if your ATA device is connected to a switch that uses VLAN tagging. The VLAN tag for the VLAN to which the ATA device is assigned. Router tab > LAN Setup page You can use the LAN Setup page to enter your LAN settings. This page includes the following sections: • "Networking Service section," on page 91 • "LAN Networking Settings section," on page 91 • "Static DHCP Lease Settings section," on page 91 Linksys ATA Administration Guide 90